簡介Introduction

SusPENT懸浮劑用于“控濾失堵漏”，該技術是指當其配制的(de)堵漏漿液進入漏失井段後，在鑽井液液拄λ壓力和地層壓力所産生的(de)壓差的(de)作用下，漿液從軸向流動轉✔變為徑向流動，在設置的(de)時間內大量失水，漿液中的(de)固相組份在重力作用(yòng‍)下沉積變稠，形成濾餅，繼而壓實，填塞漏失通道，形成段塞，達到減緩漏失的(de)效果；同時鑽井液在所形成的(de)塞面上(≤shàng)形成光滑平整的(de)泥餅，起到進一步嚴密封堵漏失通道的(de)效 果。

SusPENT suspending agent is utilized for "controlled filtration loss and lea>k sealing." This technology refers to the process wher$e, after the leak-sealing slurry prepared with SusPENT enters the lost circulation zone i•n the well, under the pressure differential created by the drilling fl&uid column pressure and the formation pressure, the slurry transitions from axial flow to r₹adial flow. Within a set time, a significant amount of water is lost ✘from the slurry. The solid components in the slurry₹ deposit and thicken under the influence of gravity, forming a filter☆ cake. This filter cake is subsequently compacted, filling the losφt circulation channels and creating a plug, thereby achieving the effect of reduci≈ng leakage. Meanwhile, the drilling fluid forms a smooth and even‍ mud cake on the surface of the formed plug, further tightly se aling off the lost circulation channels.

性能及優點Performance and advantages

l 推薦加量：1.0~6.0%；

l 液相全濾失時間5min-30min可控，實現控濾失堵漏；

l 可形成密實的(de)濾餅，使裂縫的(de)封堵承壓能力達到20.0MPa以上。

l Recommended dosage: 1.0~6.0%；

l The complete filtration loss time of the liquid phase can be controll≠ed within the range of 5 minutes to 30 minutes, enabling controlled f¥iltration loss and leak sealing;

l It can form a dense filter cake, allowing the pressure-bearing capacity of the sealed≈ fractures to reach over 20.0 MPa.

技術參數Technical Parameters

包裝Packaging

采用三合一複合牛皮紙袋包裝，內襯防水塑料薄膜，可根據用戶需求提供50kg、25kg兩種分裝規格。

The product is packaged in triple-layer composite kraft paper bags with waterproof plastic• film liners, and is available in two packaging specifications: >50kg and 25kg, according to customer requirements.